Paths

Cisco CCNA Routing and Switching

Author: Ross Bagurdes

The CCNA is an industry standard certification that demonstrates competency in data networking operation. If you’re interested in a data networking career or wish to advance your... Read more

Cisco CCENT / ICND1 100-105

The courses in this section will help prepare you for the skills needed to earn the CCENT certification, including IP addressing, router and switch operation and configuration, and Access Control Lists. These skills are the foundation for understanding Cisco technology and more importantly, fundamental data network protocol operation.

Introduction to Networking for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Jul 7, 2016 / 1h 58m

1h 58m

Start Course
Description

In this course, Introduction to Networking for Cisco CCNA 200-125/100-105, you will examine how basic human communication, like talking in person or on the phone, contains the same fundamental concepts used in moving data across a network. First, you will learn how to examine communication, and determine how to dissect it into components so it can be individually categorized and described. Next, you will learn how to break down communication into components, which will be of great benefit when understanding data networking, as there are many simple protocols which interact in complex ways. To accomplish this you will learn the TCP/IP and OSI models of networking, encapsulation, addressing, as well as what is called "chunks of information" at different points in the communication process. Finally you'll learn about the history and the birth of high speed data communications. By the end of this course, you'll know the OSI Model, TCP/IP Model, and you'll have an understanding of what encapsulation is as it relates to data networking.

Table of contents
  1. Course Overview2m
  2. A Brief History of Moving Information10m
  3. Dissecting Communication10m
  4. Network Communication Models24m
  5. Encapsulation12m
  6. Data Networks and Addressing39m
  7. Cisco Certifications18m

Network Layer Addressing and Operation for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Jul 12, 2016 / 3h 48m

3h 48m

Start Course
Description

As early as 1985, engineers knew there would be a shortage of IPv4 addresses before the end of the century. Over the next decade, engineers found a very clever solution to the problem, however it created a complex address. This course will go into extreme detail to describe the structure of an IPv4 address and its subnet mask counterpart. To do this, understanding binary numbers becomes very important. We will describe how binary numbers work, how to convert from decimal to binary and back again, as well as see how hexadecimal easily integrates into binary. This may sound daunting, however, we keep the content simple and easy to follow, so it is not overwhelming. After understanding binary and the structure of an IPv4 address, we will examine how to break a single IPv4 network into multiple IPv4 networks, understand the definition of a network address, broadcast address, and a host address. We will the examine how to calculate networks more efficiently using Variable Length Subnet Masking(VLSM), and to wrap up IPv4 addressing, we will take a simple IPv4 network, break it into 2 networks, and then observe its behavior across a router. Once we wrap up IPv4, we move into IPv6, and explain the nuances of this new and obscure looking address. We keep it as simple as possible, so you understand the structure and operation of the IP address, without getting bogged down in nuanced details, infrequently used in IPv6. We will wrap up IPv6 by learning how IPv6 networks are distributed to ISPs, customers, and finally customer sites.

Table of contents
  1. Course Overview1m
  2. Introduction to Binary22m
  3. Introduction to IP Addressing33m
  4. Introduction to Subnetting25m
  5. Subnetting Examples21m
  6. Introduction to IPv639m
  7. IPv6 Subnetting25m
  8. Router Operation16m
  9. Variable Length Subnet Masking (VLSM)27m
  10. Check Your Knowledge15m

Configuring a Cisco Router for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Jul 21, 2016 / 2h 43m

2h 43m

Start Course
Description

Configuring a Cisco router is more than just entering commands. In order to properly understand what the configuration steps do, you need to have a basic understanding of the components of a router, including processor, memory, and input/outputs. In this course, Configuring a Cisco Router for Cisco CCNA 200-125/100-105, you will learn different types of memory and the files stored in them, the order in which the files are loaded, as well as the function of each file. First, you will walk though, step by step, the commands and their function to properly configure the basic features of the device. This includes setting a router name, securing user and privileged modes, enabling encrypted remote support via SSH, and applying IP addresses to interfaces so the router can pass traffic. Next, you will see a demonstration about configuring the router in a long form, and then redo the same configuration using tips, tricks, and shortcuts to speed up the process. Common errors, including errors made during the configuration, will be pointed out and discussed. You will wrap up the course by examining Internetworking Operating System (IOS) file names, demonstrating how to upgrade IOS, as well as how to access router configuration when you don't know the password. By the end of this course, you'll understand the commands required to bring a router online, allowing it to pass traffic from one interface to another, which will help you on your path to earning the CCNA.

Table of contents
  1. Course Overview1m
  2. Cisco Router Basics9m
  3. Cisco Router Files and Licensing12m
  4. Router Configuration48m
  5. Router Configuration with Shortcuts and IPv631m
  6. Upgrading IOS19m
  7. Check Your Knowledge41m

Network Interface Layer and Ethernet Operation for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Aug 10, 2016 / 3h 6m

3h 6m

Start Course
Description

Get a better understanding on how Ethernet operates and how to configure a Cisco switch. In this course, Network Interface Layer and Ethernet Operation for Cisco CCNA 200-125/100-105, you'll learn some network interface layer protocols but focus your attention on Ethernet and Ethernet switching. First, you'll learn the details of the types of cabling, fiber optics, and wireless technology used in data link layer protocols to move information. Then, you'll examine a variety of data link layer protocols and where they are used. You'll also look at the long history of Ethernet, and then examine the Ethernet frame header, the Ethernet Switch, and how a layer 2 broadcast message propagates through the network. Lastly, you'll see a detailed demonstration of a switch configuration as well as an examination of the behavior of hubs and switches in the same network, and what the MAC address table looks like on a series of switches connected together. By the end of this course, you'll have an in-depth understanding of Ethernet and how to configure a Cisco switch.

Table of contents
  1. Course Overview1m
  2. Physical Layer Technologies31m
  3. Data Link Layer Technologies22m
  4. Introduction to Ethernet30m
  5. Ethernet Switching27m
  6. Switch Configuration35m
  7. Check Your Knowledge37m

Troubleshooting Essentials for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Aug 15, 2016 / 2h 14m

2h 14m

Start Course
Description

Troubleshooting can appear to be complex and mysterious. However, if you approach solving problems with an understanding of data networking and a method to work towards solution, troubleshooting can be more about persistence than anything magical. In this course, you will learn a methodology to approach troubleshooting, how to use the OSI and TCP/IP models to understand networked systems, and examine to approach solving IT problems with flexibility. You'll learn about CDP and LLDP and how to use these protocols to build a map of a network. Additionally, you'll understand the Cisco Design Model. Finally, you will see how to use ping and other utilities to investigate simple network issues, and see the error messages that occur from simple mistakes. By the end of this course, you'll have a solid understanding of the troubleshooting concepts covered on the Cisco CCNA 200-125 and 100-105 exams.

Table of contents
  1. Course Overview1m
  2. Troubleshooting Methodology32m
  3. Flexibility with Troubleshooting21m
  4. Neighbor Discovery40m
  5. Cisco Network Design Model8m
  6. Check Your Knowledge30m

Routing IPv4 and IPv6 for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Aug 30, 2016 / 4h 45m

4h 45m

Start Course
Description

The entire purpose of a router is to move packets from one interface to another. This course will explain in detail how IPv4 and IPv6 routing works. You will start by learning how ARP operates, allowing IPv4 packets to be sent in an Ethernet frame. Next, you will examine how you can get IP packets off of a network by using the default gateway configuration on a PC, and then take a look at what happens after the router receives the packet, and uses a route to forward the message. This course will describe how to specify and configure static routes for both IPv4 and IPv6. Throughout the course, you will look at troubleshooting tools, how to use them to effectively troubleshoot a network, and wrap up the course by looking at how you can set up a redundant IPv4 network using static routes.

Table of contents
  1. Course Overview1m
  2. Address Resolution Protocol28m
  3. The Default Gateway25m
  4. IPv4 Static Routing30m
  5. Troubleshooting IPv4 Static Routes34m
  6. IPv6 Neighbor Discovery Protocol30m
  7. IPv6 Static Routing19m
  8. Troubleshooting IPv6 Static Routing20m
  9. Check Your Knowledge: Route Selection and Dual Stack48m
  10. Check Your Knowledge: Static Routes in Redundant Networks46m

Introduction to Dynamic Routing for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Sep 16, 2016 / 2h 57m

2h 57m

Start Course
Description

Routing protocols are used to exchange routing information between routers so that engineers do not need to maintain complex static routing plans. In this course, Introducing Dynamic Routing for Cisco CCNA 200-125/100-105, you will examine the different types of routing protocols and their operation. You will start with examining the behavior of a simple dynamic routing protocol, then examine RIP and OSPF. Next, you will implement OSPFv3 for IPv6 networks. Finally you will examine the OSPF neighbor table, OSPF link state data base, and routing table for both IPv4 and IPv6. By the end of this course, you'll be able to implement the OSPF routing protocol to allow your network to dynamically exchange routing information, and create a redundant network.

Table of contents
  1. Course Overview1m
  2. Protocols and Terminology44m
  3. Introducing OSPF40m
  4. OSPFv329m
  5. Troubleshooting OSPF48m
  6. Check Your Knowledge13m

Introduction to VLANs for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Sep 26, 2016 / 2h 21m

2h 21m

Start Course
Description

VLANs are a great concept and are widely used throughout the networking industry. The idea of a VLAN is simply that an administrator has the ability to configure a switch such that there are multiple broadcast domains enabled, and inter-broadcast domain communication is not allowed. Effectively a VLAN is a broadcast domain. In this course, Introducing VLANs for Cisco CCNA 200-125/100-105, you will examine VLANs, VLAN trunks, the layer 3 switch. You will also setup a problematic network, and make errors during configuration. Finally, you'll examine both how the network will behave and how to repair broken networks. After completing this course, you'll be ready to segment a network with a single switch using VLANs.

Table of contents
  1. Course Overview1m
  2. Broadcast Domains and VLANs27m
  3. Trunking VLANs29m
  4. InterVLAN Routing13m
  5. The Layer 3 Switch14m
  6. Check Your Knowledge55m

Securing the Switch for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Oct 10, 2016 / 2h 25m

2h 25m

Start Course
Description

Switches are fantastic devices, allowing you to create VLANs, trunks, as well as offer fast and somewhat private communication. However, the basic nature of switch operation, as well as the advent of trunk links, VLAN tags and some backwards compatibility features, created some extra security risks that were not anticipated upon the advent of the technology. In this course, Securing the Switch for Cisco CCNA 200-125/100-10, you will start off by learning about frame double-tagging. Next, you'll move onto the native VLAN security issues and DTP. You'll wrap up the course with a demonstration of creating a secure base configuration for a switch. By the end of this course, you'll know how to put a secure base configuration on a switch, mitigating many layer 2 attacks against Ethernet.

Table of contents
  1. Course Overview1m
  2. The Native VLAN25m
  3. Dynamic Trunking Protocol (DTP)24m
  4. Switchport Port Security59m
  5. Check Your Knowledge34m

TCP and UDP Operation for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Oct 28, 2016 / 2h 1m

2h 1m

Start Course
Description

TCP is used in nearly every transaction users have on a network. Surfing the web, checking your email, watching a streaming video, all use TCP as the transport layer protocol. TCP has a very precise operation, and understanding how it works leads to becoming a great network troubleshooter. In this course, TCP and UDP Operation for Cisco CCNA 200-125/100-105, you will learn about the TCP three-way handshake, port number addressing, and sequence and acknowledgment numbers used for reliable communication. Next, you explore at TCP's less reliable partner, UDP. Finally, you'll understand where UDP is used and why you use it. By the end of this course, you'll know how the TCP three-way handshake works, as well as how TCP uses sequence numbers to ensure successful data delivery.

Table of contents
  1. Course Overview1m
  2. Networking and the OSI Model21m
  3. Transmission Control Protocol (TCP)41m
  4. TCP Sequence Numbers30m
  5. User Datagram Protocol (UDP)26m

Application Layer Protocols for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Nov 15, 2016 / 2h 45m

2h 45m

Start Course
Description

In a business, the entire purpose of the data network is to make the business function more effectively through the use of software applications. In this course, Application Layer Protocols for Cisco CCNA 200-125/100-105, you will examine critical application layer protocols that both help keep the network running, as well as allow end users to easily access resources on the internal network as well as the Internet. Then, you'll learn about the application layer protocols that assist engineers in maintaining the function of a network efficiently, like DHCP, DNS, Syslog, and NTP. Engineers use these protocols to maintain networks, and create an effective user experience. Finally, you'll learn about the other application layer protocols, like HTTP and FTP, and how they are used by the users themselves to browse to websites or download files. By the end of this course, you will have the foundational knowledge of DHCP, DNS, FTP, HTTP, NTP, and Syslog. You will even learn how to investigate a strategy to mitigate rouge DHCP servers from attacking your network.

Table of contents
  1. Course Overview1m
  2. Application Layer Protocols29m
  3. Syslog and Network Time Protocol (NTP)49m
  4. Domain Name System (DNS)19m
  5. Dynamic Host Configuration Protocol (DHCP)37m
  6. DHCP Snooping5m
  7. Check Your Knowledge22m

Access Control Lists (ACLs) for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Nov 21, 2016 / 2h 37m

2h 37m

Start Course
Description

Access Control Lists (ACLs) are an important and useful tool on a data network. ACLs allow an administrator to select traffic and filter traffic as it flows through a network. In this course, Access Control Lists (ACLs) for Cisco CCNA 200-125/100-105, you will first examine how standard and extended IPv4 access lists operate. Next, you'll learn how to implement each type of list on a router. Finally you'll explore common errors and how to troubleshoot ACLs using Wireshark. By the end of this course, you will be able to write your own access control lists to filter whatever traffic you want to either permit or deny on your networks.

Table of contents
  1. Course Overview1m
  2. Introduction to ACLs25m
  3. Standard ACLs28m
  4. Extended ACLs33m
  5. Check Your Knowledge: Wildcard Masks, Logging, and ACL Scenarios41m
  6. Check Your Knowledge: Using Wireshark and Telnet to Test ACLs27m

Network Address Translation (NAT) for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Nov 28, 2016 / 1h 38m

1h 38m

Start Course
Description

Network address translation (NAT) solves the problem of allowing a device with a non-routable, private IP address to get routed to the public Internet by allowing routers to manipulate the packet and segment headers. In this course, Network Address Translation (NAT) for Cisco CCNA 200-125/100-105, you'll learn all about how this works. First, you'll get an introduction to NAT, its history, and why it was developed. Next, you'll spend some time exploring the different types of NAT. Finally you'll learn how to implement and troubleshoot static NAT, dynamic NAT with overload, and port forwarding. By the end of this course, you will be able to implement all the different types of NAT in your environment.

Table of contents
  1. Course Overview1m
  2. Introduction to NAT14m
  3. Static NAT15m
  4. Dynamic NAT with Overload25m
  5. Check Your Knowledge42m

Building and Troubleshooting a Network with ICND1 Skills for Cisco CCNA 200-125/100-105

by Ross Bagurdes

Dec 21, 2016 / 4h 13m

4h 13m

Start Course
Description

The ICND1 exam is a tough exam and extensive studying and reviews are necessary to pass. In this course, Building and Troubleshooting a Network with ICND1 Skills for Cisco CCNA 200-125/100-105, you'll review all the exam topics for the ICND1 exam which will earn one the CCENT certification. First, you'll begin by creating study sheets, where it is encouraged that you write down and memorize before the exam. Next, you'll design a network, incorporating as many of the technical topics as possible from the ICND1 studies. Finally, you'll build and troubleshoot the network, with provided sample configurations to use in your own lab. By the end of this course, you should be ready to take the ICND1 exam to earn your CCENT certification.

Table of contents
  1. Course Overview1m
  2. Review and Lab Network Drawing26m
  3. Building the ICND1 Lab Network: Routers31m
  4. Building the ICND1 Lab Network: Layer 3 Switch and Switches40m
  5. Testing and Examining Our Network37m
  6. Adding Services18m
  7. Troubleshooting Our Network1h 3m
  8. ICND1 Exam Tips33m

Cisco ICND2 200-105

The courses in this section will help prepare you for the skills needed to complete the CCNA certification by covering the exam objectives required for the ICND2 exam. The topics include Layer 2 redundancy with spanning tree protocol, Etherchannel, and HSRP, Layer 3 redundancy with OSPF, EIGRP and BGP, PPP, as well as how to troubleshoot using CCNA skills.

Enterprise LAN Switching for Cisco CCNA 200-125/200-105

by Ross Bagurdes

Feb 17, 2017 / 2h 47m

2h 47m

Start Course
Description

Understanding how Ethernet works in an enterprise environment is one of the most common skills required by a network engineer. In this course, Enterprise LAN Switching for Cisco CCNA 200-125/200-105, you will learn about creating redundant layer 2 networks with spanning tree protocol and rapid spanning tree protocol. Next, you'll learn about building redundant links between switches using EtherChannel, understanding how VLAN trunking protocol works. Finally, this course will wrap up by examining switch stacking with Cisco's stackwise technology. By the end of this course, you will be able to design implement redundant layer 2 networks that can converge in less than a second, as well as increase the bandwidth between switch uplinks using EtherChannel.

Table of contents
  1. Course Overview1m
  2. Spanning Tree Protocol (STP)39m
  3. PerVLAN Spanning Tree and Rapid Spanning Tree Protocols24m
  4. EtherChannel24m
  5. VLAN Trunking Protocol (VTP)37m
  6. Cisco Switch Stacking11m
  7. Check Your Knowledge28m

WAN Technologies for Cisco CCNA 200-125/200-105

by Ross Bagurdes

Mar 7, 2017 / 1h 51m

1h 51m

Start Course
Description

Anytime an organization requires network access to a remote facility, engineers need a way to connect the remote site to the main network. WAN technologies are used to do this and come in several types to accommodate different needs. In this course, WAN Technologies for Cisco CCNA 200-125/200-105, you'll look at several WAN technologies including PPP, PPPoE, PPP Multilink, MetroEthernet, dark fiber, MPLS, and GRE/VPN tunnels. First, you'll learn how to implement a PPP connection using encrypted authentication. Next, you'll discover how to bundle several serial links together to increase the bandwidth. Finally, you'll explore how to troubleshoot PPPoE and build a GRE tunnel. By the end of this course, you'll be more comfortable with Wide Area Networks(WANs) communications.

Table of contents
  1. Course Overview1m
  2. Serial Links and PPP26m
  3. Point to Point Protocol Over Ethernet11m
  4. PPP Multilink14m
  5. Metro Ethernet and MPLS16m
  6. GRE and VPN Tunnels22m
  7. Check Your Knowledge18m

Advanced Routing for Cisco CCNA 200-125/200-105

by Ross Bagurdes

Mar 31, 2017 / 4h 3m

4h 3m

Start Course
Description

Routing protocols are mandatory for moving traffic across large networks. As networks grow in size, you need an understanding of how to manipulate the configurations of routing protocols to behave in a way that is consistent with the administrators design. In this course, Advanced Routing for Cisco CCNA 200-125/200-105, you'll learn what you need to know to be prepared for the Network Services for the CCNA 200-125 exam. First, you'll examine how the routing table operates. Next, you'll learn about advanced OSPF configuration including multi-area OSPF and auto-cost reference bandwidth. Finally, you'll explore EIGRP and BGP. By the end of this course, you'll be able to implement a tuned multi-area OSPF network where you choose the path of traffic through your network.

Table of contents
  1. Course Overview1m
  2. Advanced Static Routing33m
  3. Dynamic Routing Protocol Categories9m
  4. OSPF in a Broadcast Network22m
  5. Multi-area OSPF39m
  6. Multi-area OSPFv319m
  7. Enhanced Interior Gateway Routing Protocol (EIGRP)45m
  8. Border Gateway Protocol (BGP)26m
  9. Check Your Knowledge45m

Network Services for Cisco CCNA 200-125/200-105

by Ross Bagurdes

Apr 25, 2017 / 2h 16m

2h 16m

Start Course
Description

There are a tremendous number of protocols used to build a network, and most of these protocols are required to allow a network to pass traffic. However, in order for an engineer to maintain a quality and highly available network, you need additional protocols to help manage the network itself. In this course, Network Services for Cisco CCNA 200-125/200-105, you'll examine services an engineer can use to help improve the network. First, you'll learn protocols and services that provide redundancy, quality of service, centralized authentication, network monitoring, and vitalized networking. Additionally, you'll learn how to implement Hot Standby Router Protocol (HSRP) in a small network, which will allow an engineer to provide a redundant default gateway. Finally, you'll discover how you can use SNMP and IP SLA to monitor a network. Since Software Defined Networking (SDN) has been implemented in real products now, you'll examine Cisco's products for SDN including terminology used to describe the system. By the end of this course, you'll be able to implement a redundant default gateway using HSRP, create an IP SLA ICMP policy, and understand how Cisco has implemented SDN.

Table of contents
  1. Course Overview1m
  2. Hot Standby Router Protocol (HSRP)20m
  3. Quality of Service (QoS)22m
  4. Authentication, Authorization, and Accounting (AAA)21m
  5. Next Generation Networks27m
  6. Simple Network Management Protocol (SNMP)9m
  7. IP Service Level Agreement (IP SLA)21m
  8. Check Your Knowledge11m

Troubleshooting and Exam Prep for Cisco CCNA 200-125/200-105

by Ross Bagurdes

May 15, 2017 / 1h 28m

1h 28m

Start Course
Description

There is a tremendous amount of protocol knowledge required to pass the CCNA exam. In this final course of the CCNA training series, Troubleshooting and Exam Prep for Cisco CCNA 200-125/200-105, you will first examine how to set up a home lab with physical gear along with some virtual options if you want to go that route. Next, you will explore sample exam questions to see what your exam questions may look like. Last, you will wrap up the series with a demonstration of a broken network and then use your CCNA skills to troubleshoot and solve the network issues presented. You will be able to download config files, build the broken network in your own environment, and troubleshoot the network along side the video demonstration. By the end of the course and subsequently the other 18 courses in this learning path, you will be ready to take your ICND2 or CCNA exams.

Table of contents
  1. Course Overview1m
  2. Lab Gear Options15m
  3. CCNA Sample Questions27m
  4. Troubleshooting CCNA Skills44m

What you will learn

  • IPv4 and IPv6 Subnetting
  • Cisco IOS Router and Switch Operation and Configuration
  • IPv4 and IPv6 Static and Dynamic Routing
  • OSI and TCP/IP Model and Data Encapsulation
  • TCP and UDP Operation
  • Access Control List Operation and Configuration
  • Network Address Translation Operation and Configuration
  • Spanning Tree Protocol Operation, Configuration and Troubleshooting
  • Etherchannel Operation and Configuration
  • Point to Point Protocol with Authentication Configuration and Troubleshooting
  • GRE tunnel operation and configuration
  • Multi-area OSPF configuration, operation and troubleshooting
  • EIGRP and BGP Operation and Configuration
  • HSRP operation and configuration
  • Authentication services for Cisco devices

Pre-requisites

If you are familiar with operating Windows workstations, have limited (or maybe no) experience with Linux, and have configured your home wireless router, you have the skills needed begin your CCNA studies.

Knowledge is power

A Professional or Enterprise Pluralsight account is required to access Kaplan®* practice exams. Sign in below or sign up for a free team trial.